Summit HP P4045 User Manual
Page 13
19. Install the drum small gear side first onto the drum axle
pin
20. Install the white plastic drum bushing and screw. If the
OEM drum grease is dirty, clean it off with alcohol, and replace
with white lithium grease.
21. On the supply chamber, carefully pry off the Magnetic
roller (MRS) cover, and remove.
22. Remove the MRS drive gear.
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
HP P4014, P4015 & P4045 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Los Angeles, California 90250 USA
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
•
www.
uninet
imaging.com
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SU
MM
IT