Sony DAV-SR4W - Manual (Page 83)

Se
tting
s an
d A
d
ju
stme
nts
83 GB
To obtain the best possible surround sound, set
for the size of the speakers you have connected
and their distance from your listening position.
Then use the test tone to adjust the level and the
balance of the speakers to the same level.
Select [SPEAKER SETUP] in the Setup
Display. For details, see “Using the Setup
Display” (page 79).
The default settings are underlined.
To return to the default setting
when changing a setting
Select the item, then press CLEAR.
x SIZE
If you do not connect center or surround
speakers, or move the surround speakers, set the
parameters for [CENTER] and [SURROUND]
and specify the surround speaker position and
height. Since the front speaker and subwoofer
settings are fixed, you cannot change them.
If you connect the surround back speaker, set
[SURROUND BACK] to [YES].
Notes
• When you select an item, the sound cuts off for a
moment.
• Depending on the settings of other speakers,
subwoofer may be excessive.
x DISTANCE
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 30), the settings is automatically
displayed.
Settings for the Speakers
(SPEAKER SETUP)
SPEAKER SETUP
DISTANCE:
TEST TONE:
SIZE:
BALANCE:
LEVEL:
90
20
45
A A
B B
Position diagram
FRONT YES
CENTER YES: Normally select this.
NONE: Select this if no center
speaker is used.
SURROUND BEHIND: Select this if surround
speakers are located in section B.
SIDE: Select this if surround
speakers are located in section A.
NONE: Select this if no surround
speaker is used.
SURROUND
BACK
(appears except
when you set
[SURROUND]
to [NONE] in the
[SIZE] setting.)
NONE: Normally select this.
YES: Select this if the surround back
speaker is used.
SUBWOOFER YES
1.6m 1.6m
1.6m
1.6m
1.6m
1.6m
continued