SpectraLink NetLink 8000 - Manual (Page 17)

17
Gett
in
g S
ta
rted
Silence while ringing Press the END key to silence the ring.
Change the
ring volume
Press the up/down volume buttons on
the side of the handset during ringing.
The default ring volumes are set in the
User Profile menus.
Activate or deactivate
the speakerphone
Press the Spkr softkey and speak towards
the handset. Note that this feature may
be unavailable in your facility.
Adjust the
speaker volume
Press the up/down volume buttons on
the side of the handset during the call.
Adjust the
headset volume
Press the up/down volume buttons on
the side of the handset during the call.
Place a call on hold Press the Hold softkey.
Resume a held call Press the LINE key followed by the line
number key.
Mute the microphone Press the Mute softkey.
End the call Press the END key. Be sure to do this at
the end of each call to return to the
standby mode.
Change the profile Press the Prof softkey and use the Nav
keys to select a new profile while in
standby mode. The selected profile is
marked with an asterisk (*).
Edit the phonebook Press the Phbk softkey from standby
mode.
If you want to Then