beautypg.com

To set the clock, Op/clear, Before operating – Sharp KB-3300JS User Manual

Page 11

background image

11

BEFORE OPERATING

Before operating your new range make sure you read and

understand this operation manual completely.

Before the range can be used, follow these steps:

1

Plug in the range. The Microwave Drawer display will

show

ENJOY

YOUR

RANGE

TOUCH

CLEAR

AND

TOUCH

CLOCK

.

2

Touch the STOP/CLEAR pad.

:

will appear.

3

Set clock.

Note:
• Please do not open or close the lower oven door for 30

seconds after plugged in.

TO SET THE CLOCK

1

Touch Timer/Clock pad and number 2.

2

Touch number pads for correct time of day and touch

Timer/Clock pad again.
This is a 12 hour clock. If you attempt to enter an incorrect

clock time,

ERROR

will appear in the display. Touch the

Stop/Clear pad and re-enter the time.

If the electrical power supply to your range should

be interrupted, the display will intermittently show

ENJOY

YOUR

RANGE

TOUCH

CLEAR

AND

TOUCH

CLOCK

after the power is reinstated. If this occurs

during cooking, the program will be erased. The time of day

will also be erased. Simply touch Stop/Clear pad and reset

the clock for the correct time of day.
Note:
• The Microwave Drawer can be programmed with the

drawer open except for START/Minute Plus. The

Oven can be started with the door open except for self-

cleaning.

TIMERS

Your Insight Range features two separate independent

Kitchen Timers.

The timer on the Oven side (left) of the control panel is labeled

Timer/3 Min Plus

. The maximum length of this timer is 9

hours, 99 minutes. You set this timer in hours and minutes.

For example, one hour 30 minutes is entered as 130. 1:30 will

appear. For times over one hour, the time will count down in

hours and minutes. When the timer reaches 60 minutes, the timer

will begin counting down in minutes and seconds. To cancel

Timer/3 Min Plus

, you must touch and hold the

Timer/3

Min Plus

pad for 3 seconds.

The timer on the Microwave side (right) of the control panel

is labeled Timer/Clock. The maximum length of this timer

is 99 minutes, 99 seconds. This timer is set in minutes and

seconds. It will always count down in minutes and seconds.

To cancel this timer, simply touch Stop/Clear.
See page 19.

STOP/CLEAR

Touch the Stop/Clear pad to:

1

Erase if you make a mistake during programming.

2

Cancel timer on Microwave side.

3

Stop the Oven or Microwave Drawer temporarily during

timed cooking.

4

Return the time of day to the display.

5

Cancel a program during cooking, touch twice for timed

cooking.

MICROWAVE

OVEN

This manual is related to the following products: