Part names and functions specifications – Stanton T.12O User Manual
Page 7
20) EXTRA STYLUS HOLDER
Place extra headshells here.
21) PHONO/LINE OUTPUT L & R
This is the standard analog output (RCA jacks) which can be connected either to a phono or line input on
any DJ mixer, depending on the setting of the phono / line selector.
22) PHONO/LINE SWITCH
23) POWER CORD CONNECTOR
Used to connect the included power cord.
24) POWER SWITCH
This switch turns the power on or off, including the motor and audio signal.
APPLICATION:
This specification applies to the direct drive turntable unit T.120
STANDARD TEST CONDITION:
Ambient Temperature
20 +/- 2 degC
Relative Humidity
65% +/- 5%
NOTE: Measurements can be carried out between 5 degC to 35 degC and 45% to 85% relative humidity.
TURNTABLE SECTION:
Type
3-speed full manual
Motor
16pole, 3phase,brushless DC motor
Speeds
33
1
/
3
and 45rpm and 78rpm
Wow and Flutter
Less than 0.1% WRMS (JIS WTD) with 33
1
/
3
rpm
Pitch Controls
+/- 8%, +/-25%, +/-50%
Starting Torque
More than 4.5kgf.cm
Starting Time
0.2~6 sec.(Adjustable)
Braking Time
0.2~6 sec.(Adjustable)
Braking System
Electronic brake
Pitch Bend
+/-6%
Time for Speed Change
Less than 0.2 sec. from 33
1
/
3
to 45 rpm.
Less than 0.2 sec. from 45 to 33
1
/
3
rpm.
Less than 0.5 sec. from 33
1
/
3
to 78 rpm
Audio Output
Phono/Line output
PART NAMES AND FUNCTIONS
SPECIFICATIONS
21 22
23 24