Simaudio 750 D - Manual (Page 7)

MOON 750 D Digital-to-Analog Converter / CD Transport
Front Panel Controls
Figure 1: MOON 750D Front panel
The front panel will look similar to Figure 1 (above). The large digital display window indicates the track number of the
compact disc currently playing (or the total number of tracks in stop mode) and corresponding time information.
The “Standby” button disengages the transport mechanism from the rest of the 750D’s circuitry and turns off the digital
display. However, when in “Standby” mode, all digital and analog audio circuitry remains powered up to help maintain
optimal performance. The blue pilot LED centrally located above the display window will no longer be illuminated when the
player is in “Standby” mode.
The “Program” button allows you to program a selection of tracks in the order that you wish to listen them. After loading a
compact disc into the 750D, select the first track you wish to listen to, using the
or buttons and then press “Program”.
To program a second track, select it the same way you did for the first one and press “Program” again. Repeat this operation
as many times as you want to program tracks to a maximum of 30 tracks. Once you’ve completed programming your track
selection(s), the digital display window will show the number of tracks that have been programmed and their total time. To
begin playing your programmed selections, simply press the
X button. Pressing „ will only suspend the playing of the
programmed selection. Pressing
„
a second time will clear your program selection from the 750D’s memory. As well,
opening the top drawer at any time will also clear your program. After you begin creating your program list, the LED
immediately to the left of the “Program” button will illuminate and remain on until you clear your program from memory.
The “Display” button allows you to adjust the brightness of the large digital display window. It also provides you with the
option of turning off the display. There are three (3) different levels of brightness; The default is medium.
Pressing the
“Display” button once will increase the brightness level to highest setting. Pressing the button a second time will decrease the
brightness to the lowest setting. Pressing the “Display” button a third time returns the display to its default setting of medium.
Pressing the “Repeat” button once results in the entire disc being played again once it has reached the end of the final track.
Pressing “Repeat” a second time will result in the track currently playing being repeated again once it has ended. To cancel
this mode, simply press the “Repeat” button a third time or open the CD drawer. There are two (2) LED’s located to the left of
the “Repeat” button; The top one will illuminate when the current track is being repeated and both will illuminate when the
entire disc is being repeated. If you have created a program of selected tracks, pressing “Repeat” once will result in your
entire program repeating itself once it has completed its cycle; Pressing “Repeat” a second time will result in the current track
from your program being played again once it has ended; Pressing “Repeat” a third time will terminate the “Repeat” mode.
____________________________________________________________________________________
Front Panel Controls 7