Stanton C.314 - Manual (Page 4)

4 13
CONTROL OVERVIEW
1. TIME – Switches the time value displayed in the LCD between elapsed
track time, remaining track time, and the total remaining time for the
entire disc. Markers next to the time readout indicate which of these
modes is enabled.
2. REPEAT – When in SINGLE mode, the unit will repeat the current song.
In Continuous mode, the unit will repeat the entire disc.
3. CTN/SGL – Toggles between Continuous and Single play modes.
Continuous mode operates like a normal CD player, playing the entire
disc without stopping. Single mode only plays one track at a time,
returning to the Cue point when the track is completed. The LCD will
display “SINGLE” when in that mode.
4. TOUCH REWIND - Enables the jog wheel to facilitate beat juggling by
simply tapping the surface area of the jog wheel. Touching and releas-
ing the jog wheel once will return playback to the last marked Cue point.
5. VINYL - Enables the touch sensitive jog wheel (#21) to respond like a
turntable. During normal play mode, touching the platter will pause play-
back, and moving the platter forward or backward will create scratch
sounds.
SPECIFICATIONS
1. APPLICATION Model C.314
2. POWER SOURCE
US: 120V, 60Hz, AC 18W
EU: 230V, 50Hz, AC 18W
UK: 240V, 50Hz, AC 18W
JPN: 100V, 50/60Hz, AC 18W
ARG: 220V, 50Hz,AC 18W
AUS: 240V, 50Hz, AC 18W
3. DIMENSIONS 318 (W)x 358 (D)x 109.5 (H) mm
4. WEIGHT 4.4Kgs
5. AUDIO CHARACTERISTICS
(1) Frequency Response 20Hz to 20kHz +0/-1.5 dB
(2) Output Level +6dBV
(3) THD+N <0.015% @ 1kHz
(4) S/N Ratio (ref: fullscale) 85dB
6. SEARCHING TIME (TEST DISC: TCD-792)
ITEM TYPICAL LIMITS CONDITION
(1) Short access time 2sec 4sec Play next track
(2) Long access time 4sec 6sec Track 1 ->Track 20
Track 20 ->Track 1
7. PLAYABILITY
ITEM TYPICAL LIMIT CONDITION
(1) Interruption 1mm 0.7mm TCD-725
(2) Black dot 1mm 0.6mm TCD-725
(3) Finger prints 75um 65um TCD-725
(4) Eccentricity 140um 140um TCD-712 W/O TRACK JUMP
(5) Vertical deviation 1mm 0.5mm TCD-731R
c314_manual.qxd 5/24/06 9:43 AM Page 4