Sennheiser Evolution SKM 300 - Manual (Page 17)

16
Using the radio microphone
Selecting a standard display
Audio signal is activated (muting is deactivated)
MIC button
»
: backlit in red
Radio microphone’s display
panel: “ MUTE ”
ቨ
is not displayed
Receiver’s display panel: “ TX Mute ” is not displayed
RF signal is deactivated
MIC button
»
: not backlit
Radio microphone’s display
panel: transmission icon
ብ
is not
displayed, “ MUTE ” ቨ is
displayed
Receiver’s display panel: “ RF Mute ” is displayed *
* only when activated on the receiver (see above)
RF signal is activated
MIC button
»
: backlit in red
Radio microphone’s display
panel: transmission icon
ብ
is
displayed, “ MUTE ”
ቨ
is not
displayed
Receiver’s display panel: “ RF Mute ” is not displayed
You can also deactivate the RF signal on switch-on.
For more information, refer to the chapter
“Switching the radio microphone on/off” on
page 13.
Using the ON / OFF button, you can also activate/
deactivate the RF signal during operation. To do so,
briefly press the
ON / OFF button and proceed as
described on page 13.
̈
Move the multi-function switch to select a
standard display.
Contents of the display Selectable standard display
“ Frequency/Name ”
“ Frequency bank/Channel/
Frequency ”
“ Name/Frequency bank/
Channel ”
ew300 G3
MHz 531.375
MUTE P
AF
MHz 531.375
B.Ch: 20.24
MUTE P
AF
B.Ch: 20.24
MUTE P
AF
ew300 G3