Sterling Plumbing Shower Receptor and Wall Surround with Backer Boards 72130106 - Manual (Page 2)

Technical Information
Model Door maximum
width Door maximum
height
72130106 56-5/8 ″ (143.8 cm) 70-1/2 ″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
Attach grab bars at the specified backer board locations only.
2"
(5.1 cm)
2"
(5.1 cm)
10"
(25.4 cm)
16"
(40.6 cm) 16"
(40.6 cm)
14"
(35.6 cm)
15-13/16"
(40.2 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
3-5/16" D.
(8.4 cm)
Drain Hole 30" (76.2 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
1-5/8" (4.1 cm)
at Midpoint 34"
(86.4 cm)
1-1/4"
(3.2 cm)
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
3-1/2"
(8.9 cm)
35-1/4"
(89.5 cm)
12" (30.5 cm)
or 24" (61 cm)
Grab Bar
1" (2.5 cm)
from Grout Line
End Wall
2" (5.1 cm)
from Grout Line
12"
(30.5 cm)
Grab Bar
2"
(5.1 cm)
10"
(25.4 cm)
1" (2.5 cm)
from Grout Line
Back Wall
3-1/2"
(8.9 cm)
24"
(61 cm)
Grab Bar
1" (2.5 cm)
from Grout Line
72-1/2"
(184.2 cm)
2"
(5.1 cm)
Note: Right and left end walls are the
same, only mirrored.
Backer board locations
60"
(152.4 cm)
4-1/2"
(11.4 cm)
5-1/2"
(14 cm)
77"
(195.6 cm)
Product Diagram
ENSEMBLE
TM
ENSEMBLE
TM
60
″ (152.4 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page 2 of 2
1065813-4-
E