Specifications – Sony HDW-D2000 User Manual
Page 140

Appendix
A-4
Appendix
Specifications
Processor adjustment range
Video level
±3 dB/ –
∞ to +3 dB selectable
Chroma level
±3 dB/ –
∞ to +3 dB selectable
Setup level (59.94i, 29.97PsF mode)
±30 IRE
Black level (50i, 25PsF mode)
±210 mV
Chroma phase
±30°
System phase
Sync: ±15 µs
SC: ±200 ns
Input connectors
HDSDI INPUT
BNC (1 each for input and for
through output to a monitor)
Serial digital (1.485 Gbits/s)
SMPTE 292M
SDTI INPUT
BNC (1) (optional)
SMPTE 305M (SDTI)
REF. VIDEO INPUT
BNC (2 in loop through
connection)
Black burst or composite sync
0.3 Vp-p, 75
Ω, sync negative
AUDIO INPUT CH1/2/3/4
XLR 3-pin, female (4)
LOW OFF: –60 dBu, high
impedance, balanced
HIGH OFF: +4 dBu, high
impedance, balanced
HIGH ON: +4 dBm, 600
Ω
termination, balanced
CUE IN
XLR 3-pin, female (1)
LOW OFF: –60 dBu, high
impedance, balanced
HIGH OFF: +4 dBu, high
impedance, balanced
HIGH ON: +4 dBm, 600
Ω
termination, balanced
AUDIO INPUT(AES/EBU) CH1/2, 3/4
BNC (2)
Complies with AES-3id-1995
TIME CODE IN
XLR 3-pin, female (1)
0.5 to 18 Vp-p, 10 k
Ω, balanced
Output connectors
HDSDI OUTPUT
BNC (3 including 1 for character
superimposition)
Serial digital (1.485 Gbits/s)
SMPTE 292M
SDTI OUTPUT
BNC (2) (optional)
SMPTE 305M (SDTI)
COMPONENT VIDEO OUTPUT
BNC (3 for 1 set)
Y: 1.0 Vp-p, Sync negative
R–Y/B–Y: 0.7 Vp-p, 75
Ω, with
100% or 75% color bar selectable
COMPOSITE VIDEO OUTPUT
BNC (3 including 1 for character
superimposition)
1.0 Vp-p, 75
Ω, Sync negative
SDI OUTPUT
BNC (3 including 1 for character
superimpositon)
Serial digital (270 Mbits/s)
SMPTE 259M
AUDIO OUTPUT CH1/2/3/4
XLR 3-pin, male (4)
+4 dBm at 600
Ω load, low
impedance, balanced
CUE OUT
XLR 3-pin, male (1)
+4 dBm at 600
Ω load, low
impedance, balanced
AUDIO OUTPUT (AES/EBU) CH1/2, 3/4, 5/6, 7/8
BNC (4)
Complies with AES-3id-1995
MONITOR OUTPUT (L/R)
XLR 3-pin, male (2)
+4 dBm at 600
Ω load, low
impedance, balanced
TIME CODE OUT
XLR 3-pin, male (1)
2.2 Vp-p, low impedance, balanced
PHONES
JM-60 stereo phone jack
–
∞ to –12 dBu at 8 Ω load,
unbalanced