beautypg.com

Deactivating the lock mode temporarily, Activating/deactivating the rf signal, Adjusting the audio channels – Sennheiser SR 2050 IEM User Manual

Page 15

background image

Using the transmitter

14

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the “

Auto Lock

” menu item. If the

lock mode is activated, you have to temporarily deactivate it In order to be able to operate
the transmitter:

The lock mode icon

flashes prior to the lock mode being activated again.

Activating/deactivating the RF signal

To

deactivate

the RF signal:

To

activate

the RF signal:

To

deactivate the RF signal

on

switch-on

:

̈

See “offline operation” on page 13.

Adjusting the audio channels

Via the “

Mode

” menu item, you can adjust the audio channels.

̈

Select “

Stereo

” if you want to transmit two separate audio signals on channel I and

channel II (e.g. channel I

= audio signal of the presenter/musician, channel II

= sum of all

audio signals).
This allows the presenter/musician to adjust the balance between the left and right stereo
signal on his receiver.

̈

Select “

Mono

” if you only want to transmit an audio signal on one channel. In this case,

the signal from the left audio input

BAL AF IN L (I)

ƺ

is transmitted.

̈

Press the jog dial.

Locked

” appears on the display panel.

̈

Turn the jog dial.

Unlock?

” appears on the display panel.

̈

Press the jog dial.
The lock mode is temporarily deactivated.

– When you are in the operating menu, the lock mode remains deactivated until

you exit the operating menu.

– When the standard display is shown, the lock mode is automatically activated

after 10 seconds.

̈

When the standard display is shown on the display panel, press the

STANDBY

button.

RF Mute On?

” appears on the display panel.

̈

Press the jog dial.
The RF signal is deactivated. “

RF Mute

” flashes in alternation with the standard

display and the display is backlight in red.

̈

Press the

STANDBY

button.

RF Mute Off?

” appears on the display panel.

̈

Press the jog dial.
The RF signal is activated and the display backlighting changes from red to
orange.

Standard -18dB

MHz

PEAK

-10

0

-20
-30
-40

PEAK

-10

0

-20
-30
-40

AF II

AF I

**2000**

552.300

B.Ch: 5.14

EQ

This manual is related to the following products: