Sennheiser SR 2050 IEM - Manual (Page 12)

Putting the transmitter into operation
11
Connecting an audio source to the input sockets
̈
Use a suitable cable to connect the output of the audio source (e.g. mixing console) to the
¼” (6.3 mm) jack/XLR-3 combo socket
BAL AF IN L(I)
ƺ
and/or BAL AF IN R(II)
ƻ
.
̈
Via the operating menu, adjust the transmitter’s input sensitivity. The input sensitivity is
adjusted via the “
Sensitivity ” menu item and is common for both inputs.
Daisy chaining audio signals
The output sockets LOOP OUT BAL L
Ƹ
and/or LOOP OUT BAL R
ƹ
allow you to daisy chain a
signal that is to be transmitted to all receivers from the mixing console to one transmitter
and then to the other transmitters. To do so, proceed as follows:
̈
Route a signal from the mixing console to the input socket (in this example: BAL AF IN R
ƻ
)
of transmitter A .
̈
Connect the output socket LOOP OUT BAL R
ƹ
of transmitter A to the input socket
BAL AF IN R
ƻ
of transmitter B .
̈
Connect the output socket LOOP OUT BAL R
ƹ
of transmitter B to the input socket
BAL AF IN R
ƻ
of transmitter C .
̈
Repeat for the other transmitters.
PUSH PUSH Stereo Transm
L(I) R(II)
BAL
AF IN
+ 22dBu MAX RF OUT
ANT
DESIGNED AND MADE IN GERM
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095 FMO
IC 2099A-SR20x0
ƺ ƻ
You can connect several transmitters to the same audio source (see next chapter).
The AF output sockets LOOP OUT BAL L
Ƹ
and/or LOOP OUT BAL R
ƹ
will work only
when the transmitter is switched on and powered.
50/60Hz 0.2 A ETHERNET RJ-45
B
100 - 240V RF OUT
PUSH
L(I) R(II)
BAL AF IN B + 22dBu MAX
PUSH
L(I) R(II)
BAL AF IN A + 22dBu MAX
ANT A
ETHERNET RJ-45
B
RF OUT
ANT B DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 627945
SER NO 251810043 FMO IC 2099A-SR20x0
L(I) R(II)
+22dBu MAX
Loop Out B BAL
PUSH Stereo Transmitter SR 2000 IEM
L(I)
DESIGNED AND MADE IN GERMANY FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095 FMO IC 2099A-SR20x0
L(I) R(II)
+22dBu MAX
Loop Out A BAL
50/60Hz 0.2 A ETHERNET RJ-45
B
100 - 240V RF OUT
PUSH
L(I) R(II)
BAL AF IN B + 22dBu MAX
PUSH
L(I) R(II) BAL AF IN A + 22dBu MAX
ANT A
ETHERNET RJ-45
B
RF OUT
ANT B DESIGNED AND MADE IN GERMANY FREQ RANGE-Dw
790-865 mHz
ART NO 627945
SER NO 251810043 FMO IC 2099A-SR20x0
L(I) R(II)
+22dBu MAX
Loop Out B BAL
PUSH Stereo Transmitter SR 2000 IEM
L(I)
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095 FMO IC 2099A-SR20x0
L(I) R(II)
+22dBu MAX
Loop Out A BAL
50/60Hz 0.2 A ETHERNET RJ-45
B
100 - 240V RF OUT
PUSH
L(I) R(II)
BAL AF IN B + 22dBu MAX
PUSH
L(I) R(II)
BAL AF IN A + 22dBu MAX
ANT A
ETHERNET RJ-45
B
RF OUT
ANT B DESIGNED AND MADE IN GERMANY FREQ RANGE-Dw
790-865 mHz
ART NO 627945
SER NO 251810043 FMO IC 2099A-SR20x0
L(I) R(II)
+22dBu MAX
Loop Out B BAL
PUSH Stereo Transmitter SR 2000 IEM
L(I)
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095 FMO IC 2099A-SR20x0
L(I) R(II)
+22dBu MAX
Loop Out A BAL
A
B
C
50/60Hz 0.2 A ETHERNET RJ-45
B
100 - 240V L(I) R(II)
+22dBu MAX
Loop Out BAL
PUSH PUSH Stereo Transmitter SR 2000 IEM
L(I) R(II)
BAL AF IN + 22dBu MAX RF OUT
ANT DESIGNED AND MADE IN GERMANY FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095 FMO IC 2099A-SR20x0
50/60Hz 0.2 A ETHERNET RJ-45
B
100 - 240V L(I) R(II)
+22dBu MAX
Loop Out BAL
PUSH PUSH Stereo Transmitter SR 2000 IEM
L(I) R(II)
BAL AF IN + 22dBu MAX RF OUT
ANT DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095 FMO IC 2099A-SR20x0
50/60Hz 0.2 A ETHERNET RJ-45
B
100 - 240V L(I) R(II)
+22dBu MAX
Loop Out BAL
PUSH PUSH Stereo Transmitter SR 2000 IEM
L(I) R(II)
BAL AF IN + 22dBu MAX RF OUT
ANT DESIGNED AND MADE IN GERMANY FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095 FMO IC 2099A-SR20x0
A
B
C