Setting the reception mode – Sharp FO-B1600 User Manual

Page 32

Setting the Reception Mode

Setting the Reception Mode

Your fax has three modes for receiving incoming faxes:

FAX mode:
Select this mode when you only want to receive faxes on your line. The fax
machine will automatically answer all calls on four rings and receive incoming
faxes.

TEL mode:
Select this mode when you want to receive both phone calls and faxes on the
line connected to the fax machine. All calls, including faxes, must be
answered by picking up the fax machine's handset or an extension phone
connected to the same line.

A.M. mode:
Use this mode only if you have connected an answering machine to the fax
(see Chapter 5). Select this mode when you go out to receive voice messages
in your answering machine and faxes on your fax machine.

Setting the reception mode

Make sure a document is not loaded in the document feeder, and then

press

until the arrow in the display points to the desired mode.

RESOLUTION/

RECEPTION MODE

For more information on receiving faxes in FAX and TEL modes, see Chapter 3,
Receiving Faxes. For more information on using A.M. mode, see Chapter 5.

FAX

TEL

FAX

TEL

FAX

A.M.

TEL

JAN-03 10:30

16/POLL

17/G1

18/G2

RESOLUTION/

RECEPTION MODE

RESOLUTION/
RECEPTION MODE