SUPER MICRO Computer X8STI-F - Manual (Page 11)

Chapter 1: Introduction
1-3
Motherboard Layout
Important Notes to the User
See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front
•
panel connections.
" " indicates the location of "Pin 1".
•
Jumpers not indicated are for testing only.
•
JBMC1 is reserved for internal testing only.
•
Do not change the jumper setting
pre-set by the manufacturer.
When LE1 (Onboard Power LED Indicator) is on, system power is on. Unplug
•
the power cable before installing or removing any components.
LSI 1068E
NIC4 LE
D
JBMC
1