Samson Hartke Acoustic Pre-Amp - Manual (Page 5)

Acoustic Attack Front Panel Layout
1 OUTPUT - Control knob used to adjust
the overall Output volume.
2 BASS - Control knob used to boost or cut
the low frequencies.
3 MID – Used to boost or cut the midrange
frequencies.
4 TREBLE - Control knob used to boost or
cut the high frequencies.
5 FREQ – Used to adjust the center fre-
quency of the MID control.
3
6 ON/OFF - Footswitch used to engage
the effects.
7 ON/OFF LED – RED LED, which illumi-
nates to indicate that the OUTPUT, BASS,
MID, TREBLE and MIX, plus the Tube Pre
Emulation functions are engaged.
8 MIX – Control knob used to adjust
the blend between the dry signal and
effected signal.
� � � �
�