Sharp CD-BA2100 - Manual (Page 9)

COMPACT DISC OPERATION
■ CD playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
● CDs can be placed on any open position on the disc tray.
● Be sure to place 3" (8 cm) CD(s) in the middle of the disc
trays.
Caution:
Do not stack CDs in the tray.
This can damage the player and the CDs.
5
When loading a third disc, press the DISC SKIP button to turn
the disc tray, then place the CD in the open position.
6
Press the OPEN/CLOSE button to close the disc tray.
● The total number of tracks and the total playing time for one
disc will be displayed. At this time, the disc number indicator
is flashing.
● The music schedule will be displayed only for the number of
tracks on the disc.
● If the CD contains more than 15 tracks, " C " will appear.
7
Press the desired disc number button ( 1 - 3).
8
Press the 0/R ( 0R ) button.
● Playback will begin from track 1 on the disc you have selected
to play.
● After the disc finishes playing, the next disc will automatically
play.
● When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will be played.
● When the last track on the third disc has finished playing, the
unit will stop automatically.
To interrupt playback:
①
Press the CD 6 button on the remote control.
● " 6 " will appear.
②
Press the 0R button to resume playback from the same
point.
To stop playback:
Press the ■ (CD ■ ) button.
To remove the CDs:
While in the stop mode, press the OPEN/CLOSE button.
● The disc tray will open. Remove the two discs. Then, press
the DISC SKIP button to rotate the disc tray and remove the
remaining disc.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
CD
CD
4 5
1
2
7
3,6
5
8
7
2
1
5
8
5" (12 cm)
3" (8 cm)
Music schedule More tracks indicator
Total number of tracks Total playing time
CD-BA2100(SEC) TINSE0283AWZZ
8