Sennheiser evolution wireless SR 300 IEM - Manual (Page 26)

If a problem occurs ...
24
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions,
please contact your local Sennheiser partner for assistance. To find a Sennheiser partner in your country, search at
www.sennheiser.com under “Service & Support”.
Audio signal is distorted If “ AF PEAK ” additionally appears on the
transmitter display:
transmitter sensitivity is adjusted too
high
Adjust the transmitter sensitivity correctly.
Receiver’s audio output level is adjusted
too high Reduce the audio output level
(see the instruction manual of the receiver).
Problem Possible cause Possible solution
For accessories, visit the ew G3 product page at www.sennheiser.com.