Sharp MD-SR60E - Manual (Page 34)

34
Advanced Features
33
1
Insert a Master MiniDisc.
2
Whilst in the stop mode, press the EDIT
button to select “NAME STAMP”.
3
Press the ENTER/SYNC button.
● To cancel the operation, press the • ■ /:OFF button.
4
Press the ENTER/SYNC button.
5
When the unit displays “CHANGE MD”,
remove the master MiniDisc.
● Remove it without turning off the power. Or the
operation will be cancelled.
Stamping titles from another MiniDisc
Before stamping
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc and track names) of the Master MiniDisc to another
MiniDisc (for stamping).
Titling a MiniDisc : continued
1. What is a master MiniDisc?
A recordable MiniDisc that contains tracks and char-
acter information.
(You can not transfer the information from a play-
back-only MiniDisc.)
2. What is a MiniDisc for stamping?
A MiniDisc that contains the same tracks in the same
order as the master MiniDisc.
(Make sure that the total number of tracks of the
master MiniDisc and the one for stamping are the
same.)
Do not mistake the Master
MiniDisc for the target one.
Master MiniDisc operation
**05-ADVANCED FEATURES 02.07.2000, 10:04 AM 34