SUPER MICRO Computer 6014H-8 - Manual (Page 59)

Chapter 5: Advanced Serverboard Setup
5-23
5-10 Onboard Indicators
GLAN LEDs
Each Ethernet port has two LEDs.
The yellow LED indicates activity
while the other LED may be green,
orange or off to indicate the speed
of the connection. See the table
on the right for the functions as-
sociated with this second LED.
LED
Color
Off
Green
Orange
Definition
No Connection
100 MHz
1 GHz
Gb LAN Right LED
Indicator
SCSI Controller Enable/
Disable
Jumper JPA1 allows you to enable
or disable the SCSI headers. The
default setting is pins 1-2 to enable
all four headers. See the table on
the right for jumper settings.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
SCSI Enable/Disable
Jumper Settings
(JPA1)
Power Force On
Jumper JPF allows you to force the
system into a permanent power on
state. Power will remain on (re-
gardless of the power button being
activated) until this jumper is reset
to "open". The default setting is
open. See the table on the right for
jumper settings.
Jumper
Position
Open
Closed
Definition
Normal
Power Force On
Power Force On
Jumper Settings
(JPF)