beautypg.com

Front panel and commands, 2 description of commands – Smeg F65-5 User Manual

Page 4

background image

Front panel and commands

20

2.2 Description of commands

FUNCTION SWITCH KNOB

Selects the desired cooking functions. The symbols are shown below.

Turning the knob the various function symbols light up, simultaneous
with the timer and internal oven light indicators.

NO FUNCTION SET

GRILL ELEMENT + VENTILATION

GRILL ELEMENT IN OPERATION
ALTERNATING WITH BOTTOM
HEATING ELEMENT

WIDE GRILL ELEMENT +
VENTILATION

UPPER AND LOWER
HEATING ELEMENT

UPPER AND LOWER HEATING
ELEMENT + VENTILATION

LOWER HEATING ELEMENT

LOWER HEATING ELEMENT +
VENTILATION

WIDE GRILL ELEMENT

VENTILATED HEATING ELEMENT +
VENTILATION

GRILL ELEMENT

UPPER AND LOWER HEATING
ELEMENT + VENTILATED
HEATING ELEMENT

THERMOSTAT KNOB

Selection of cooking temperature.

Turn the knob clockwise to the required temperature, between 50°
and 250°C. The temperature light indicates that the oven in is heating-
up phase.
When this light goes out, the preset heating temperature has been
reached.
The light will come on periodically during use to indicate that the oven
is being kept at the set temperature by a thermostat.






TIMER KNOB

Lets you choose manual cooking or the timer with automatic turn-off of
the oven when done.

For manual control of cooking time, turn the knob anticlockwise to the
symbol

.

To set cooking time turn the knob clockwise. The numbers from 10 to
120 correspond to minutes. Adjustment is progressive and
intermediate positions between the numbers shown may be used.
At the end of programmed cooking an intermittent sound signal is
emitted. This can be de-activated by turning the function selector knob
to the position

.