Sirius Satellite Radio SCH2P - Manual (Page 17)

[
Installation
] 1
Roof mount
When mounting the antenna on the roof of a home or building, mount the antenna as close to
the peak of the roof as possible. Remember to avoid blocking the antenna’s view of the sky by
locating it where a chimney, dormer, gable, etc., may obstruct the sky view. (Figure 9)
The antenna mounting bracket should be oriented in a vertical position as shown in Figure 5,
and mounted directly to the soffit or chimney of the building or home using the provided #10
screws.
Once you have determined a suitable mounting location, use the mounting bracket as a
template and mark the mounting area with the location of the four screw holes in the bracket.
Then, using a 3/32 in. drill bit, drill pilot holes for the screws. It may be necessary to fill the
holes with a small amount of caulk to insure a watertight installation. Screw the bracket to the
mounting location using the provided #10 screws.
figure 9 figure 9