Smeg Integrated with Freezer CR320ASX - Manual (Page 3)

Instructions for Use 59
•
Never use continuous operation unless unnecessarily required;
switch the operation mode selection switch to the setting for
automatic operation as soon as possible.
•
Before loading the appliance with packages of fresh foods, make
sure they are cooled to ambient temperature. (except for the soup)
•
Ice and frost layer increase energy consumption, so do clean the
appliance as soon as the layer is 3-5 mm thick.
•
If the gasket is damaged or if it turns out that the sealing is poor, the
energy consumption is substantially higher. To restore efficiency,
replace the gasket.
•
The condenser on the rear wall should be always clean, free of dust
or any impurities.
•
Always consider instructions stated in sections Positioning and
Energy Saving Tips, otherwise the energy consumption is
substantially higher.
Important
•
If you have bought this appliance to replace an old one equipped with
a lock that cannot be opened from inside (lock, bolt), make sure that
the lock is broken. This will make it impossible for children to lock
themselves inside the appliance and suffocate.
•
The appliance must be correctly connected to the mains supply. (see:
Connecting to the Mains Supply).
•
If the food has strange smell or color, throw it away, because it is
very likely that it is spoiled and therefore dangerous to eat.
•
Disconnect the appliance from the power supply before repairing it
(only a qualified technician should repair it), before cleaning and
before replacing the light bulb.
•
Do not defrost the appliance with other electric appliances (as for
example with hair dryer) and never scrape the frost layer with sharp
objects. Use only enclosed tools or tools recommended by the
manufacturer.
•
For the sake of environment protection - be careful not to damage
the rear wall of the appliance (the condenser unit or the tubes - for
example when moving the appliance) or any part of the refrigerating
system inside the appliance. Do not use sharp object for defrosting
the appliance. Use only enclosed tools or tools recommended by the
manufacturer.
•
The refrigerating system of the appliance is filled with refrigerant and
oil, so when the appliance is damaged, handle it with care and
dispose it of in compliance with environmental protecting
precautions. (See We Care for the Environment).