Sharp FO-2150CM - Manual (Page 2)

UX-2200CMU/CMC
FO-2150CMU/CMC
– 1 –
[1] Engine Specifications
1. Mechanism
Resolution : 600 dpi x 600 dpi addressability
Print Speed : 3 PPM draft text with black cartridge
Print Swath : 8 inches
Duty Cycle : Up to 500 pages per month maximum, 170 pages per month average
Dimensions (approximate) : 350mm x 125mm x 60mm
Weight (approximate)
: 1.2 pounds
Acoustics : 45 dBA in letter quality mode (using Lexmark paper feed and covers which is not
included)
2. Electrical
No electrical hardware included with the type B engine except for the carrier drive stepping motor and the Sensor
FPC assembly whitch includes a photo interrupter for sensing home position, the carrier cables and the printhead
cable.
3. Print Cartridges (Print Cartridges are supply items and sold separately)
Black Print Cartridge : 56 Nozzles
Pigment based(water proof)
High yield cartridge Up to 1000 pages at 5% coverage
Color Print Cartridge : 48 Nozzles(16 Nozzles each of cyan, magenta and yellow)
Fade resistant ink
300 pages average at 15% coverage of 3 colors (5% coverage of each color)
[2] Abbreviations
EOF End-of Form
ESD Electrostatic Discharge
FRU Field Replaceable Unit
HVPS High Voltage Power Supply
LVPS Low Voltage Power Supply
NVRAM Nonvolatile Random Access Memory
OEM Original Equipment Manufacturer
POST Power-On Self Test
V ac Volts alternating current
V dc Volts direct current
ZIF Zero Insertion Force
[3] Diagnostic Information
Start
Power-OnSelf Test (POST) Sequence
When you turn the printer on it performs a POST. Turn the machine on and check for a correct POST operation by
observing the following:
1. The carrier moves.
2. The paper feed gears turn.
3. After 30 seconds the carrier moves over the maintenance
station and caps the printhead.
4. All motors stop.