Sub-Zero Undercounter Refrigeration - Manual (Page 12)

12
S U B - Z E R O U N D E R C O U N T E R U S E & C A R E
C L E A N I N G
S T A I N L E S S S T E E L E X T E R I O R
To clean the classic stainless steel exterior,
use a soft, nonabrasive stainless steel cleaner
like Signature Polish and apply with a soft
100% lint-free cloth. To bring out the natural
luster, lightly wipe the surface with a water-
dampened microfiber cloth followed by a dry
polishing chamois. All work should follow the
grain direction of the finish. Better results are
obtained by keeping the cloth in continuous
contact with the stainless steel.
G L A S S D O O R C L E A N I N G
The glass door panel of Model UC-24B can be
cleaned using any standard glass cleaner avail-
able on the market today.
I N T E R I O R C L E A N I N G
To clean interior surfaces and removable parts,
wash with a mild solution of soap and luke-
warm water with a little baking soda. Do not
use vinegar. Rinse and dry thoroughly. Avoid
getting water on lights, control panel and LCD
display.
IMPORTANT NOTE: Do not use abrasive
cleaners or cloths on any of the interior or
exterior surfaces, including the glass door
panel.
Under no circumstances should you use
a metallic or highly abrasive cleaner or
cloth, as this will scratch the classic
stainless steel finish.
S I G N A T U R E
P O L I S H
Signature Polish
is available from
Signature Limited
Laboratory,
P. O. Box 13436,
Dayton, Ohio
45413-0436, or
877-376-5474
(toll free).
Before cleaning the unit, shut the electric-
ity off at the control panel.
Do not submerge or pour hot water over
cold glass shelves.