Sony Ericsson HVR-MRC1 - Manual (Page 2)

Issue 1 Page 2
© Sony United Kingdom Ltd March 2009
supply connected to the cradle. Figure 2 shows a rear view of the HVR-MRC1 with
the i.LINK cradle and a battery connected.
Figure 2. HVR-MRC1 with i.LINK cradle and battery
The combined recorder can then be mounted onto the camera using an optional
mounting bracket or the supplied
1
shoe adaptor.
Figure 3. Images of HVR-MRC1 mounted on a HVR-V1E using the supplied
shoe adaptor (left) and the optional VCT-1BP mounting plate (right).
Configuring the HVR-MRC1 and the camera
In this section we will look at the settings of the following controls:-
CAM LINK – This setting is on the memory recorder
CAM LINK SEL – This setting is in the menus of the memory recorder and only
makes a difference when CAM LINK is enabled.
EXT REC CTRL – This control is in the menu of newer HDV cameras, and will only
make a difference when CAM LINK is enabled and CAM LINK SEL is set to
SYNCHRO.
1
Only supplied with the HVR-MRC1. Not supplied as part of the HVR-Z7E or HVR-S270E.