Sharp BD-HP21U - Manual (Page 7)

5
Intr
oduction
n
IMPORTANT SAFETY INSTRUCTIONS
Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. •
Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the
product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the
product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only
the mounting hardware recommended by the manufacturer. •
Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or
block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life
of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block
ventilation openings. This product is not designed for built-in installation; do not place the product in an
enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's
instructions are followed. •
Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat. •
Lightning — For added protection for this product during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the
equipment due to lightning and power-line surges. •
Selecting the location — Select a place with no direct sunlight and good ventilation. •
To prevent fire, never place any type of candle or flames on the top or near the product. •
To prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product. •
BD-HP21U_en.indd 5 BD-HP21U_en.indd 5 2008/07/17 19:43:13 2008/07/17 19:43:13