Sharp AL-1340 - Manual (Page 14)

12
2
Installation
INSTALLING THE TD CARTRIDGE
2
Remove the CAUTION tape from the front cover and remove the two protective pins
from the fusing unit by pulling the strings upward one at a time.
Protective pins CAUTION tape
3
Push gently on both sides of the front cover to open the cover.
4
Remove the TD cartridge from the bag. Remove the protective paper. Hold the cartridge
on both sides and shake it horizontally four or five times.
4 or 5 times
5
Hold the tab of the protective cover and pull the tab to your side to remove the cover.