Soleus Air FC1-15-30 - Manual (Page 4)

OPERATING INSTRUCTIONS
Set the fan on a stable, level surface. Plug the cord into a standard 120V A/C outlet.
POWERING ON THE FAN
The fan can be turned on by setting the timer dial to “I” and pressing any of the “Speed
Buttons”. “1” is low, “2” is medium, and “3” is high speed. Pressing the “0” button will
turn the fan off.
OSCILLATION BUTTON
The fan can operate in oscillation or stationary mode. Press the oscillation button down
to start oscillation. To turn off oscillation, press the oscillation button again, and the
button will pop-up.
TIMER DIAL
The fan can be programmed to automatically shut-off after a set period of time. The
timer dial can be set for 20 minute increments. The maximum programmed time is 2
hours. Once the timer dial reaches “0”, the fan will automatically shut-off.
20
60 100
I O
O
80
120
I
O
1
2
3
40
High Speed
Timer Dial
Medium Speed
Low Speed Oscillation
Button
Fan Off
4