Shark S1215C - Manual (Page 16)

14
2
4
1
3
1
2
3
REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the
parallel position and turn it over.
Slide the latch in the direction
of the arrow.
Remove the bottom plate by pulling
the tabs as illustrated.
REATTACHING THE BOTTOM PLATE
Insert the projection on the bottom plate
into the groove on the nozzle housing
and set the bottom plate in place.
Push the bottom plate as shown.
Slide the latch in the direction shown.
Turn the vacuum over and place in the
upright position.
Press
Press
Bottom Plate
Projection
Groove
Latch
Latch
Bottom Plate
Press Press
Pull here