Simaudio MOON 700I - Manual (Page 4)

LITHO CANADA
Moon 700i Specifications
Configuration Fully balanced, dual-mono
Power Supply Transformers 2 x 0.5kVA
Power Supply Capacitance 68,800µF
Circuit Topology Open Loop
Balanced inputs (XLR) 1 pair
Single-ended inputs (RCA) 4 pairs
Monitor Loop (RCA) 1 pair (inputs & outputs)
Input Impedance 23,700Ω
Input Sensitivity 490mV – 6.0V RMS
Preamplifier line-level output (RCA) 1 pair @ 50Ω
Output Device Type - Amplifier Proprietary MOON BiPolars - 6 per channel
Output Binding Posts Gold-plated WBT
Output Power @ 8Ω 175 Watts per channel
Output Power @ 4Ω 350 Watts per channel
Output Impedance 0.02Ω
Damping Factor > 400
Volume Steps 0.5dB from 0-30 and 0.1dB from 30-80
Gain Control M-eVOL2
Gain 37dB
Signal-to-noise Ratio (Preamplifier / Amplifier) 120dB (20-20kHz) / 105dB @ full power
Maximum Output Voltage
45 Volts
Slew Rate 35V/µs
Maximum Current - Peak / Continuous 42 amperes / 22 amperes
Frequency Response 10Hz - 100kHz +0/-0.1dB
Crosstalk @ 1kHz -100dB
Intermodulation Distortion Unmeasureable
THD (20Hz - 20kHz) < 0.015% @ 1 watt / < 0.04% @ 175 watts
Remote Control All Aluminum Full-Function
Display Type 8 character dot matrix LED
Power Consumption @ idle 50 Watts
AC Power Requirements 120V / 60Hz or 240V / 50Hz
Shipping Weight 60 lbs / 27 Kgs
Dimensions (W x H x D, inches) 19.2 x 5.6 x 18.0
Specifications subject to change without notice
19.2
17.6
5.6
18.0
13.8