ScyTek Electronics 3000Plus Series - Manual (Page 12)

Page 8 - Galaxy 3000 Plus
Ignition Door Locking
For added safety, the Ignition Door Locking feature allows vehicles equipped with power door lock systems
to automatically lock the doors when the ignition is turned on. If a door is open when the ignition is turned
on, the Ignition Door Locking feature is disabled to protect against locking the keys inside the vehicle.
Ignition Door Unlocking
For added convenience, this feature automatically unlocks the doors after the ignition key is turned off. If
the optional Passenger Unlock feature is installed, the Ignition Door Unlocking feature can be programmed
to unlock only the driver door as a higher measure of safety, especially when children are present. The
Ignition Door Unlocking feature may also be completely disabled if desired.
Dome Light Activation
If the optional Dome Light Activation feature is installed, the dome light will turn on when the system is
disarmed using the Remote Transmitter. The dome light will remain on for 30 seconds or until the ignition
is turned on.
Auxiliary Function Outputs
The Galaxy 3000 Plus system is equipped with 3 Auxiliary Channel Outputs allowing the convenience
features of the system to be further expanded. These outputs can be programmed for pulsed, timed, or
latched operation, and used to add a number of optional features such as: power trunk release, remote
engine start, power window activation, power sunroof control, auxiliary lighting, audio/video system control,
and more.
The Pulsed operation setting allows an output to activate as long as the button is held.
The Timed operation setting allows an output to activate when the transmitter button is pressed, and
remain activated for 10 seconds or until the transmitter button is pressed again.
Note: With the optional ScyNet network interface and Wizard software, the timed output can be programmed for any time
between 1 second and 255 seconds.
The Latched operation setting allows an output to activate when the transmitter button is pressed, and
remain activated until the transmitter button is pressed again.
When your system is combined with an optional remote start module, using an auxiliary function to activate
the Remote Car Starter while the system is armed will temporarily disable the sensor inputs. This will allow
the alarm to continue protecting the door and hood/trunk inputs, while preventing false triggering due to
the vibration caused by the engine starting and running.
Disarm with Auxiliary Function
If Auxiliary 1 is installed to activate the vehicle’s trunk release, the system can be programmed to
automatically disarm the alarm when the trunk is opened using the transmitter. In this manner, the trunk
can be accessed without first disarming the alarm.
Extended FFeatures