Symphonic SC313E - Manual (Page 11)

REW/s F.FWD/ B
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
- 11 - EN
DEGAUSSING
This television has a degaussing circuit that will clear
up color errors on the TV screen that are caused by
any excess magnetism which happens to get too close
to the TV. This circuit is designed to operate once
when the set is first plugged in. If minor color errors
are seen in some locations on the screen, please
unplug the TV for approximately 30 minutes. When
the TV is plugged back in, the degaussing circuit will
operate once to clear them up. Repeat this procedure
any time the TV screen is accidentally magnetized or
when the TV is moved or relocated.
PICTURE CONTROL
The unit’s picture controls – BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a more natural looking image.
NOTE:
• When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
• The unit power must be turned on.
1
Select “PICTURE CONTROL”
Hit [MENU] on the remote control.
Press [PLAY/K
K ] or [STOP/L L ] to
point to “PICTURE CONTROL”.
Then, hit [F.FWD/ B
B ].
2
Select item you want to adjust
Press [PLAY/K K ] or [STOP/L L ]
until desired control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
GAME MODE
This function enables you to decrease the TV screen
contrast and making it suitable for use with a video
game.
NOTE: This function CANNOT be set during
recording.
Hit [GAME] on the remote control.
“GAME” appears on the screen.
When you hit [GAME];
• The unit comes on automatically
if it is off.
• The unit will be in external input
mode automatically.
GAME
•
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
– M E N U –
TIMER PROGRAMMING
B PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
3
Adjust the picture control
Press [REW/s s ] or [F.FWD/ B B ] to adjust to your
desired level within 5 seconds.
WAKE UP TIMER
The Wake Up Timer function turns on the unit
without using [POWER] after a desired period of
time.
NOTES:
• Use the remote control for this procedure.
• Clock must be set to the correct time before setting
the timer.
• If you want to select [TAPE], you must insert a
cassette tape in the unit. The tape will start
playback automatically on your desired time.
1
Call up “WAKE-UP TIMER” setting
Hit [WAKE-UP/SLEEP] once, and
confirm “ON/OFF” is pointed.
Press [REW/s
s ] or [F.FWD/ B B ]
until “ON” appears.
2
Select “TV” or “TAPE”
Press [PLAY/K K ] or [STOP/L L ]
until to point to “TV/TAPE”.
Press [REW/s
s ] or [F.FWD/ B B ],
and select [TV] or [TAPE].
3
Set wake up time
Press [PLAY/K K ] or [STOP/L L ] until
to point to “TIME”.
Press [REW/s
s ] or [F.FWD/ B B ]
until your desired wake up time
appears.
Each additional press will increase
(or decrease) the time by 10
minutes.
4
Exit the Wake Up Timer setting
Hit [MENU] to return to TV mode.
TO CANCEL THE WAKE UP TIMER
Select [OFF] at step 1.
WAKE UP B ON/OFF [ON]
TIMER TV/TAPE [TV]
TIME [12:00AM]
WAKE UP ON/OFF [ON]
TIMER B TV/TAPE [TV]
TIME [12:00AM]
BRIGHT
– P P P P P P P P P P P P P P C C P P P P P P P P P P P P P P +
WAKE UP ON/OFF [ON]
TIMER TV/TAPE [TV]
B TIME [12:00AM]
TO CANCEL THE GAME MODE
Press [GAME] or [CHANNEL K/L] on the remote
control.