Sharp EC-6312P - Manual (Page 4)

4
2. Insert the holder in the hole
on the body as shown.
OPERATING INSTRUCTIONS AND PART LIST
ON / OFF SWITCH ACCESSORIES
HOW TO TIDY UP
CORD REWIND BUTTON
With the cord plugged into an elec-
trical outlet, start or stop the
vacuum cleaner by pressing the
switch. To rewind the cord, press the cord
rewind button while holding the plug.
If cord is not retracted completely, pull
it out a little and press the cord rewind
button again.
cord rewind
button
Crevice tool
Use for door tracks, narrow spots,etc.
Soft brush with crevice tool.
Use for carved furniture, table tops,
etc.
FLOOR NOZZLE
2-STEP FLOOR NOZZLE
Ideal for the daily cleaning of carpets and hard floors.
• Press the lever (A) for cleaning hard floors.
• Press the lever (B) for cleaning carpets.
1. Rewind the power cord first, then wind the suction hose
around the extension pipe.
Holder
Hole A B
Switch
DUST INDICATOR
If dust indicator change to "red", the
bag is full and must be changed or
dispose the dust.
Open the controller
on the hose handle
to control the air or
to release any items
suck in the nozzle.
AIR SLIDE VALVE
To control suction
power, turn the
power control knob.
POWER CONTROL
knob
Low:
For curtains and delicate materials.
High:
For ordinary carpets and floors.
Medium:
For deep-pile velvet carpets and
delicate carpeting.
1
2
Soft brush Crevice tool
TELESCOPIC PIPE
When extend or
shorten, push the
button.
Button
Accessories
Floor nozzle
Carrying
handle
Case cover
release button
Dust
Indicator
Cord rewind
button
Power
control ON/OFF
switch
Suction
hose
Air slide valve
Telescopic
pipe
close open