Siemens PPX:5056860 - Manual

1
2586546–0009
02/95
Copyright 1995 by Siemens Industrial Automation, Inc.
All Rights Reserved — Printed in USA
PPX:505–6860 RS-485/RF I/O Channel Converter
Installation Instructions
About this Product
These instructions describe the installation of a
PPX:505–6860 RS-485/RF I/O Channel
Converter in the SIMATIC
r
505 programmable
controller system.
The PPX:505–6860 converter allows the use of
coaxial cables in a 505 system (extending the
maximum distance to 4 km) by converting the
RS-485 interface to an RF interface. This also
permits use of dual media from a 545/555 to the
I/O bases.
Installing a PPX:505–6860 converter also
allows you to update an existing 560/565
system, that is already using coaxial cables,
with a 545/555 and 575 CPU providing the
advantages of greater speed, dual media, and
greater remote distance.
Organization of Instructions
•
Compatibility Issues
•
Installation Procedure
•
Upgrading from a 560/565 system to a
545/555
•
Upgrading from a 560/565 system to a 575
Related Manuals
The following manuals contain information
related to the installation of the PPX:505–6860
converter and cables:
•
SIMATIC 505 Redundant I/O System
Manual (PPX:505–8125–x).
•
SIMATIC 545/555 System Manual
(PPX:555–8101–x).
•
SIMATIC 575 System Manual
(PPX:575–8101–x).
•
SIMATIC 505 Programming Reference
Manual (PPX:505–8104–x).
•
The user manual for your release of
TISOFT

programming software.
•
The system manual(s) for your
controller(s).
Technical Assistance
For technical assistance, contact your Siemens
Industrial Automation, Inc., distributor or sales
office. If you need assistance in contacting your
U.S. distributor or sales office, call
1–800–964-4114.
SIMATIC is a trademark of Siemens AG.
TISOFT, Series 500, Series 505, and Peerlink are
trademarks of Siemens Industrial Automation, Inc.
BELDEN