Soundstream Technologies EXC.4 User Manual
Page 8
WIRING
7
EXC System Wiring Diagram
Figure 8 shows a diagram illustrating the wiring of the EXC Component Speaker
System. It is important to make sure that all connections are in phase; that is positive (+)
is connected to positive (+), and negative (-) is connected to negative (-), since an out-of-
phase connection will cause a dislocated image and low bass output. We suggest using
a minimum of 16 gauge (ideally 12 gauge) premium cable. The connectors provided with
this system will accommodate wire from 12 gauge to 16 gauge.
FIGURE 8