Sharp AM-900 - Manual (Page 16)

Installation
14
Connecting the telephone line cord
Insert one end of the line cord into the socket on the back of the machine
marked TEL. LINE. Insert the other end into a wall telephone socket.
Setting the dial mode:
The machine is set for tone dialing. If you are on a pulse dial line, you must set
the machine for pulse dialing. Press the keys on the operation panel as
follows:
1
Make sure that the date and time
display of fax mode appears (if needed
press ) and then press .
2
Press .
3
Press .
4
Select the dial mode:
TONE: PULSE:
5
Press repeatedly to exit.
FAX MENU
Display:
The display briefly shows
your selection, then:
1:TONE
FAX SETTING
5: RINGER VOLUME
1: DATE&TIME SET
TEL.
LINE
TEL.
SET
Make sure that the line cord
is inserted into the TEL LINE
jack. Do not insert it into the
TEL. SET jack!