Siemens MI291A - Manual (Page 4)

Maintenance Info MI291a: Guarto MP3 SR2
1.2 Fixed Application Problems
The current RTC chip is not available anymore. So, a new pin compatible device
with a new chip was produced in cooperation for Guarto and AlgoRex. This re-
quires the use of a new RTC driver, which supports the current chip as well as the
new device.
Therefore, a new HW version is provided too, where the current RTC chip is re-
moved from the board and a socket is mounted instead, so that the piggy-back de-
vice with the new RTC chip can be inserted.
1.3 Fixed Tool Problems
For the mentioned SR1 of MP3 an improved SWE6 tool V5.0a was provided.
The following problems were fixed:
z The delay of remote transmission for 'Security-jeopardizing fault' and 'Major fault'
was not visible and configurable anymore
(new range for each remote transmission type 10..1800s)
z Generation of CNAP profile adjusted that a data import of the management sys-
tem doesn't stop anymore because of a section without zone
z Listing of configuration data (for sections) contained also the section number
and not only the numbers of the linked zones
Installation (Update V5.0):
– Uninstall SWE6 MP3 V5.0
– Install SWE6 MP3 V5.0
Î When this message appears: click No
4
Building Technologies MI291a.doc
Fire Safety & Security Products 01.2009