Standard Horizon Hx500s - Manual (Page 13)

HX500S Page 11
4.1.4 USING THE CD-35 CHARGER CRADLE
1. Turn the transceiver off.
2. Insert the DC plug from the NC-90 into the DC jack on the CD-35 side
panel, then plug the NC-90 into the AC line outlet.
3. Insert the HX500S (with the battery pack) into the CD-35; the antenna
should be at the left side when viewing the charger from the front.
4. If the HX500S is inserted correctly, the Red indicator on the CD-35 will
glow. A fully-discharged pack will be charged completely in approximately
8 hours.
Important Note:
Do not leave the charger connected to the transceiver for continuous
periods in excess of 24 hours. Long term overcharging can degrade the
Lithium-Ion battery pack and significantly shorten its useful life.
5. When charging is completed, disconnect the pack from the CD-35, and
unplug the NC-90 from the AC line outlet.
4.1.5 MOUNTING THE CD-35 ON THE VESSEL
The CD-35 is designed to be surface on a vessel which can be connected to
the charger.
If mounting on a vessel, the CD-35 must be mounted in a location on the
vessel that is directly shielded from rain or splashes of water. After the loca-
tion is found, mount the CD-35 using the supplied mounting screws.
CD-35 Desktop Mount