Sharp VL-NZ150U - Manual (Page 8)

vii
Quick Operation Guide
Easy Camera Recording
on Tape
1
Insert a cassette into the camcorder.
2 Set the Media Selection
switch to TAPE.
3
Hold down the Lock button and set the
Power switch to CAMERA.
• The picture from the lens now displays.
4
Press the REC START/STOP button to
begin recording.
To pause recording
Press the REC START/STOP button again.
A U T O
RE C
Zooming
Push the Power Zoom control to T (1) (tele-
photo) or W (2) (wide angle) side.
Tape Playback
1
Set the Media Selection
switch to TAPE.
2
Hold down the Lock button
and set the Power switch to
VCR.
3
Press j (or k) on the Operation button
to rewind (or fast forward) the tape to the
desired point.
4
Press m to begin playback.
To stop playback
Press l.
Volume Control
Push the Volume control to the L or + side to
increase (1) or decrease (2) the volume.
Power switch
STILL button
REC START/STOP button
Power Zoom control/Volume control
Operation button
Media Selection switch
Power Zoom control
Volume control
Lock button
SET button
Lock button