Changing clipit™ covers, Changing clipit™ covers, Dismantle the phone – Siemens C70 CT70 User Manual

Page 11: Assemble the phone

Sieme

2003, O:\M

obil\R65\C7

0_He

\en\sug\_v

ehmann\C70_

Startup.fm

Getting started

VAR Langua

ge: en; V

R issue

date: 041104

left page (10)

of SUG_C70 Hera (PoC), en, A31008-H7803-A1-1-7619 (24.11.2004, 15:36)

Changing CLIPIt™

covers

You can use CLIPIt™ covers (accesso-

ries) to personalise the appearance

of your phone as you wish.
Before changing the keypad or

faceplate, switch the phone off.

Dismantle the phone

Take off the battery cover and

remove the battery (see p. 8).

To remove the faceplate, insert the

key into the opening provided, apply

slight pressure

and turn it at the

same time

to open the lock.

Do not use the key to lift the phone

as this could damage the faceplate.

Assemble the phone

First insert the keypad mat

into

the faceplate. Ensure that it is sitting

exactly in place.

*) If there are small pins at the bot-

tom of the faceplate: position the

tabs on both sides of the keypad mat

precisely on these pins. before car-

rying out step

Insert the phone into the bottom of

the upper faceplate

and then

push it in carefully until it clicks into

position

. Finally, replace battery

cover (see p. 8).