Sierra Siera IP Camera VSP 3001 - Manual (Page 25)

23
Appendix 3: Specification
Hardware
100 levels are optional
Brightness
NTSC/PAL: 640x480, 320x240, 160x120
Ethernet(10 Base-T)
TCP/UDP/IP, ARP, ICMP, HTTP, TFTP, Telnet, SMTP
max. 30 frames/second. Net: max. 300Kbytes/second
Trigger: I/O input/timer(frequency/motion detection
Response: TFTP / E-mail / I/O output to peripheral
equipment
Assign the IP address: use ARP or through administrator page
through TELNET
Microsoft IE5.x or later, Netscape Navigator 4.x or later,
Win98/NT/2000/XP
2 layer password protection
0 - 40
20-80 %
DC12V, 1A
<10 watts
100 77mm
0.60kg with power
* Frame rate will change with the condition of a network and the PC performance.
* A sensor must be attached for alarm mode.
System requirement
Security
Operation temperature
Humidity
Power
Consumption
Dimension
Weight
I mage size
Image
Resolution
Ethernet port
Network protocol
Performance
Trigger and
response
Installation
Update firmware
CPU: 32 Bits RISC
ROM: 2M Bytes Flash ROM
RAM: 16M Bytes SDRAM
1 RJ-45 for Ethernet
1 I/O input terminal and 1 I/O output terminal