Sirius Satellite Radio SIRPNR2C - Manual (Page 8)

8 SIRPNR2C Installation Guide
Wiring and Cable Connections
Antenna Input
Connect the right-angle SMB
connector from the antenna. Push
firmly to attach.
IP-Bus Output Connector
Use the supplied IP-BUS cable to
connect to the Pioneer Headunit or
Audio Processor – See “System
Connection Examples” for more
specific details.
IP-BUS Input Connector
Connect to optional Pioneer audio
equipment like CD Changers - See
“System Connection Examples” for
more specific details.
Antenna Input (SMB)
IP-Bus Output Connector (BLACK)
IP-Bus Input Connector (BLUE)
Power Connector
B
C
D
A
Power Harness Connector
After the wiring connections are
complete, plug the wiring harness into
the connector. Make sure to insert
firmly to lock the connector in place.
*NOTE* BE SURE TO CONNECT THE
BATTERY (Yellow) AND GROUND (Black)
WIRES CORRECTLY. IF THEY ARE
CROSSED, THE FUSE INSTALLED IN THE
POWER HARNESS FUSE BOX WILL
BLOW. IF THE FUSE BLOWS, YOU WILL
NEED TO REPLACE IT.
FILTER &
FUSE BOX IN
O U T
1 Open
2 Yellow -- Battery (+12VDC)
3 Black -- Ground (-)
4 Open
Power harness with
serviceable fuse box