Sony CPD-L133 - Manual (Page 37)

17
Getting Started Technical Features
F
D
ES
EN
I
Power consumption
CPD-L133
≤
30 W*
≤
42 W**
CPD-L150 ≤ 25 W* ≤ 35 W**
CPD-L133 ≤ 1.5 W* ≤ 4 W**
CPD-L150
≤
1.5 W*
≤
4 W**
CPD-L133 ≤ 1.5 W* ≤ 4 W**
CPD-L150
≤
1.5 W*
≤
4 W**
CPD-L133
≤
1.5 W*
≤
4 W**
CPD-L150 ≤ 1.5 W* ≤ 4 W**
CPD-L133
≤
1.5 W*
≤
4 W**
CPD-L150 ≤ 1.5 W* ≤ 4 W**
INFORMATION
MODEL : CPD-L150
SER. NO : 1234567
MANUFACTURED : 1998
Power Saving Function
This monitor meets the power-saving guidelines set by
VESA and
E NERGY S TAR, as well as the more stringent
NUTEK .
If the monitor is connected to a computer or video graphics
board that is VESA DPMS (Display Power Management
Signaling) compliant, the monitor will automatically reduce
power consumption in three stages as shown below.
You can set the delay time before the monitor enters the
power saving mode using the OSD. Set the time according
to “Setting the Power Saving Delay Time” on page 14.
Note
If no video signal is input to the monitor, the “NO INPUT
SIGNAL” message (page 18) appears. After the delay time has
passed, the power saving function automatically puts the monitor
into the active-off mode and the
u indicator lights up orange. Once
the horizontal and vertical sync signals are detected, the monitor
automatically resumes its normal operation mode.
Displaying the INFORMATION
OSD
You can confirm the name, the serial number and the year
of manufacture of this monitor.
Press and hold the MENU button for five seconds.
The INFORMATION OSD appears.
Example
The INFORMATION OSD automatically disappears after
about 30 seconds.
To close the OSD, press the MENU button again.
Plug & Play
This monitor complies with the DDC

1 and DDC2B
Display Data Channel (DDC) standards of VESA.
When a DDC1 host system is connected, the monitor
synchronizes with the V. CLK in accordance with the VESA
standards and outputs the EDID (Extended Display
Identification Data) to the data line.
DDC

is a trademark of the Video Electronics Standard
Association.
* Power consumption of the monitor only
** Power consumption of the monitor including the AC adaptor
MENU
Model name
Serial number
Year of manufacture
Power consumption
mode
Normal operation
Standby (1st mode)
Suspend (2nd mode)
Active-off (3rd mode)
Power-off
Screen
active
blank
blank
blank
––
Horizontal
sync signal
present
absent
present
absent
––
Vertical
sync signal
present
present
absent
absent
––
Recovery time
—
Approx. 3 sec.
Approx. 3 sec.
Approx. 10 sec.
—
u Indicator
Green
Green and orange
alternate
Green and orange
alternate
Orange
Off
1
2
3
4
5