SIIG 1X4 HDMI 1.3 CAT5E - Manual (Page 2)

2
Layout
Figure 1: Back Layout
• +5V DC: Power adapter jack for the included 5V
power adapter
• HDMI Input: Connect HDMI source here
• USB: For firmware update use only
• DIP Switch: EDID & audio information (see the
table on the next page)
• HDMI Out 1–4: HDMI signal output 1-4 to link to
the HDTV(s) over CAT5e cable and terminated by
receiver(s) CE-H20111-S1 or CE-H20211-S1
• Signal: LED will be on when HDMI source device is
powered on
• Power: LED will be on when the 1x4 HDMI 1.3
CAT5e Distribution Amplifier is powered on
+5V DC
HDMI Input
DIP Switch
HDMI Out 1-4
USB
Signal
Power