Speco Technologies HT - INTB8/9/10 - Manual (Page 31)

PROBLEM SOLUTION
Nothing appears on
the screen
● Check the power cable and line connection
Between the camera and monitor.
● Check that you have properly connected the
VIDEO cables
The image on the
screen is dim.
● Is the camera lens stained with dirt?
Clean the lens with a soft and clean cloth.
● Adjust the monitor as required.
● If the camera is exposed to very strong light,
Change the camera position.
● Adjust the lens focus properly.
The image on the
screen is dark.
● Adjust the contrast feature of the monitor
● If you have an interediate device, set the
75
Ω
/ Hi-z properly.
The camera is not
working properly
and the surface of
the camera is hot.
● Check that you have properly connected the
Camera to an appropriate power source.
MOTION DETECTION
function is not active.
● Have you set " MOTION DET" menu to off?
● Have you set " MD AREA " properly?
30
If you have trouble when operating your camera, please check the following
TROUBLE SHOOTING