SOYO Super 7 V1.1 - Manual (Page 8)

SY-5EHM/5EH5 V1.x Quick Start Guide
8
Installation
Install the Motherboard
Follow the steps below in order to perform the installation of your new 5EHM/5EH5 V1.x
Super 7 ™ Motherboard.
Step 1.
Install the CPU
To mount the Pentium ® processor that you have purchased separately, follow these
instructions.
CPU Mount Procedure
1. Lift the socket handle up to a vertical position.
2. Align the blunt edge of the CPU with the matching pinhole distinctive edge on the
socket.
3. Seat the processor in the socket completely and without forcing.
4. Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector (JP12) on the Motherboard. The fan is a key component that will
ensure system stability. The fan prevents overheating, therefore prolonging
the life of your CPU.
1 2
3 4