beautypg.com

Scn40r roofing coil nailer, Tool specifications, Fastener specifications – Senco SCN40R User Manual

Page 2: 264 mm) length: 9

background image

For additional information on how Senco fastening systems will
save you time, reduce costs, and increase quality, call your nearest
Authorized Senco Dealer or Distributor listed in the Yellow Pages
under “Staples,” or call our toll-free Action Line: 1-800-543-4596.

* “Restrictive Trigger” activated tools are
used for applications where precision nail
or staple placement is desired. You must
first depress the safety element where
you want to drive a nail or staple and then
pull the trigger. After each nail or staple is
driven, completely release the trigger and
lift the tool off the work surface.

“Dual Action” activated tools are used

for applications where high-production
work is desired. There are two modes of
operation:

Bottom Fire Method: This method of

operation is sometimes called bounce

firing. You must keep the trigger pulled
while moving the tool along the work sur-
face with a bouncing motion, depressing
the safety element where you want to
drive a nail or staple.

Trigger Fire Method: First depress the

safety element where you want to drive a
nail or staple and then pull the trigger.

For instructions on safe use of tools

with either of these activating mecha-
nisms, please refer to the Operating
Instructions or Customer Satisfaction and
Safety Reminder contained in your tool
carton.

The only way to work.

®

Safety First.

®

SCN40R Roofing Coil Nailer

Ne

verLube

R

eq

uires no lubri

ca

tio

n

©1999 by Senco Products, Inc. Order MK307 (7.5AMP1096) Litho in U.S.A.

www.senco.com

Tool Specifications:

Weight: 5.2 lbs. (2.3 kg)
Height: 10

3

8

" (264 mm)

Length: 9

3

4

" (248 mm)

Nail Capacity: 120
Collation: Conical wound, angled coil wire
Operating Pressure: 70-120 psig (4.8-8.3 bar)
Mode of Operation: Tool is available with either Restrictive
Trigger or Dual Action activating mechanism.*
Hose Fitting:

1

4

" NPT

Fastener Specifications:

Inches

3

4

"

7

8

"(1d)

1"(2d)

1

1

4

"(3d)

1

1

2

"(4d)

Millimeters

19

22

25

32

38

Shank Diameter

.120

.120

.120

.120

.120

Part Number

HJ11

HJ12

HJ13

HJ15

HJ17

Lengths

Available in both 3.2 and 7.2 carton count