Sony SLV-EZ11AZ - Manual (Page 3)

3
Introduction
* G-CODE is a registered trademark of Gemstar Development Corporation. The G-CODE system
is manufactured under license from Gemstar Development Corporation.
Getting Started
Table of contents
Getting Started
4 Step 1: Unpacking
5 Step 2: Setting up the remote commander
8 Step 3: Connecting the VCR
10 Step 4: Tuning your TV to the VCR
12 Step 5: Setting the clock
14 Step 6: Presetting channels with the EASY G-CODE SET UP function
(SLV-EZ44AZ/EZ22AZ only)
16 Presetting channels
23 Setting up the G-CODE* system manually (SLV-EZ44AZ/EZ22AZ only)
26 Changing/disabling programme positions (SLV-EZ44AZ/EZ22AZ only)
Basic Operations
30 Playing a tape
34 Recording TV programmes
37 Recording TV programmes using
the Easy Timer function
43 Recording TV programmes using
the G-CODE system (SLV-
EZ44AZ/EZ22AZ only)
46 Setting the timer manually
Additional Operations
48 Playing/searching at various
speeds
49 Setting the recording duration
time
50 Checking/changing/cancelling
timer settings
52 Searching the beginning of an
Easy Timer recorded programme
53 Searching using the index
function
55 Adjusting the picture
56 Changing menu options
57 Editing with another VCR
Additional Information
59 Troubleshooting
62 Specifications
63 Index to parts and controls
Back cover
Index