Soleus Air KY-36 - Manual (Page 6)

INSTALLATION
SELECTING THE LOCATION
Place the unit in a flat location where the air
outlets cannot be obstructed. Place the unit no
less than 20” (50cm) away from a wall or other
obstacle.
MOUNTING THE EXHAUST HOSE
Slide the square end of the exhaust duct over
the hot air outlet on the back of the unit.
The exhaust hose should be kept as short and
straight as possible. Take care to prevent any
sharp bends in the exhaust hose, as this will
trap hot exhaust air.
The hot exhaust air can be vented through the
wall or out a window. If mounting in the wall, the
height of the hole should be 16 to 50 inches
(40cm to 130cm).
6