Smeg LAVATRICE LBS65-9 - Manual (Page 8)

8 - EN
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions before
starting the program.
C
Auxiliary function buttons may differ
according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not be
selected together with a previously selected
function is chosen, the first selected function
will be cancelled and the last auxiliary function
selection will remain active.
For example: If you want to select pre-wash
first and then quick wash, pre-wash will be
cancelled and quick wash will remain active.
Auxiliary function that is not compatible
with the program cannot be selected. (see
“Program Selection Table”)
• Prelavaggio (Prewash)
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you save
energy, water, detergent and time. Pre-wash
without detergent is recommended for lace
and curtains.
• Risciaquo Aggiuntivo (Rinse Plus)
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins’ risk of being affected by the
remainder detergent on the clothes will be
decreased.
• Antipiega (Rinse Hold)
If you do not want to unload your clothes
immediately after the cotton, synthetics,
woolen and delicate fabrics program, you
may release your clothes inside the machine
in the last rinsing water by pressing the rinse
hold button in order to prevent your clothes
become wrinkled. After this process you may
spin your laundry by pressing “Start/Pause/
Cancel” button or you may end the program
by pressing “Start/Pause/Cancel” button for
3 sec.
• In the machines equipped with spin speed
selection knob or button, you can spin by
selecting the desired spin speed and press
“Start/Pause/Cancel” button.
• As for machines not equipped with a spin
speed selection knob, you can end the
program without a spin cycle by pressing
the “Start/Pause/Cancel” button and
draining the water. If you wish your clothes
be spun, you can spin them by selecting
“pump+spin” program.
• No Heat
If you wish to wash your clothes in cold water,
you can use this program.
• Esclusione Centrifuga (No Spin)
You may use this program if you do not want
to spin your clothes at the end of cottons,
synthetics, woolen or delicate programs.
• Spin speed reduction
You may use the speed reduction button
whenever you wish to spin your clothes
below the maximum spin speed. When speed
reduction button is pressed, spin speed will be
at the minimum rpm given on the panel.
Starting the Program
Press “Start/Pause/Cancel” button to start
the program. “Start/Pause/Cancel” button
will light up to indicate that the program has
started. The door is locked and the “Lid” light
fades.
Progressing a program
Progress of a running program is shown
through the program follow-up indicator. At
the beginning of every program step, the
relevant indicator lamp will light up and light of
the completed step will turn off.
C
If the machine is not spinning, the
program may be in rinse hold mode or the
automatic spin correction system has been
activated because of excessive unbalanced
distribution of laundry in the machine.
Changing the selections after the
program has started
You can use this feature after your machine
has started to wash different textile groups
in the same batch of clothes under higher
or lower temperatures. You must cancel
the ongoing program in order to change the
washing program.
For example, press and hold the “Start/Pause/
Cancel” button for 3 seconds to “Cancel”
the program in order to select “Cottons 40”
program instead of “Cottons 60” program.
Select the “Cottons 40” program by rotating
the program knob. Press “Start/Pause/Cancel”
button to start the program.
Switching the machine to standby
mode
Press “Start/Pause/Cancel” button
momentarily to switch your machine to the
standby mode. Auxiliary functions can be
cancelled or selected in accordance with
the step the program is at. The door can be
opened if the water level is suitable. Laundry
may be added / taken out by opening the
door.
Child-proof lock
You can protect the appliance from being
tampered by children by means of the child-
proof lock. In this case, no change can be
made in the running program.